SIIG 1-Port Serial PCIe Card Guía de instalación

Busca en linea o descarga Guía de instalación para Tarjetas de interfaz / adaptadores SIIG 1-Port Serial PCIe Card. Siig JJ-E10011-S2 Manual de usuario

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 8
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 0
1
CyberSerial PCIe
Quick Installation Guide
04-0393B
Introducing the CyberSerial PCIe
The CyberSerial PCIe high-speed serial I/O card provides
one additional 9-pin serial port.
Features and Benefits
Compliant with PCI Express Base Specification 1.0a
PCI Express 1-lane (x1) serial I/O card works with
PCI Express slots with different lane width
Installs in any available PCI Express slot and
provides one 9-pin RS232 serial port
Spare enhanced low profile bracket is included to
work in low profile chassis
32-byte FIFO buffers dramatically increase data
transmit/receive speed and supports data rates up
to 230Kbps
Works as standard RS232 port or with 5V or 12V
power output for devices that require power
System Requirements
PCI Express-enabled system with an available PCI
Express slot
Windows
®
2000/XP (32-/64-bit)/Server 2003
(32-/64-bit)/Vista (32-/64-bit)
Vista de pagina 0
1 2 3 4 5 6 7 8

Indice de contenidos

Pagina 1 - CyberSerial PCIe

1CyberSerial PCIeQuick Installation Guide04-0393BIntroducing the CyberSerial PCIeThe CyberSerial PCIe high-speed serial I/O card providesone additiona

Pagina 2 - Jumper Settings

2Package Contents• CyberSerial PCIe adapter and spare enhanced lowprofile bracket• "Y" split power cable• Driver CD and Quick Installation G

Pagina 3 - Hardware Installation

3Hardware InstallationGeneral instructions for installing the card are providedbelow. Since the design of computer cases andmotherboards vary, refer

Pagina 4 - Driver Installation

4Driver InstallationThis section provides information on how to install theCyberSerial PCIe drivers.Windows 20001. At the Found New Hardware Wizard, c

Pagina 5 - Windows Vista

52. Click on the + (plus sign) in front of Ports (COM &LPT), CyberSerial 16Cxxx... should be displayedone time.3. Double click Multifunction adapt

Pagina 6 - Changing COM Port Address

6Changing COM Port AddressSome serial devices need a specific COM port in order towork. If your serial device works properly, do notchange this setti

Pagina 7

7Technical Support and WarrantyQUESTIONS? SIIG’s Online Support has answers! Simply visit ourweb site at www.siig.com and click Support. Our online

Pagina 8 - About SIIG, Inc

CyberSerial PCIe is a trademark of SIIG, Inc. SIIG and the SIIG logo are registered trademarks of SIIG,Inc. Microsoft , Windows and Windows Vista ar

Comentarios a estos manuales

Sin comentarios