SIIG Cyber I/O PCI Guía de instalación descargar pdf (Pagina 8)

Windows Vista

™

1. At the Found New Hardware window, insert the

driver CD, click Locate and install driver software

(recommended), then click Continue.

2. Click Next, then click Close.

3. Repeat step #2 to complete the driver installation.

Note: Windows Vista driver installation process

may take several minutes to complete.

To Verify Windows Vista Installation

1. Right click Computer, click Manage, click Continue,

then click Device Manager.

2. Click on the + (plus sign) in front of Ports (COM &

LPT), CyberSerial PCI 16Cxxx... and CyberParallel

PCI... should be displayed.

3. Double click Multifunction adapters, SIIG

CyberPro 1S1P PCI board should be displayed.

Changing COM Port Address

Some serial devices need a specific COM port in order to

work. If your serial device works properly, do not

change this setting.

Windows 95/98/98SE/ME

1. From the Device Manager window double click

Ports (COM & LPT), then double click CyberSerial

PCI... serial port.

2. Click Settings tab, at the Port Name box click the

down arrow and select a COM address that is not

currently in use.

3. Click OK, click OK again to close Device Manager

to save the changes.

1 2 3 4 5 6 7 8 9 10 11 12

Sin comentarios

SIIG Cyber I/O PCI Guía de instalación Pagina 8