SIIG JU-SA0012-S1 Guía de instalación descargar pdf (Pagina 3)

2.5" IDE Hard Disk

44-pin IDE connector is protected against polarity and

should be easily connected to the device. If not, check if

your connection points are appropriately aligned.

1. Connect the 44-pin IDE connector of the adapter to

the 2.5" HDD.

2. Attach the provided power supply to your 2.5"

HDD.

3. Plug the adapter into the USB port of your PC via the

mini USB cable.

3.5" IDE Hard Disk

40-pin IDE connector is protected against polarity and

should be easily connected to the device. If not, check if

your connection points are appropriately aligned.

1. Connect the 40-pin IDE connector of the adapter to

the IDE connector of your IDE HDD.

2. Attach the provided power supply to your IDE

HDD.

Figure 2: Connecting 2.5" IDE HDD

1 2 3 4 5 6 7 8

Sin comentarios

SIIG JU-SA0012-S1 Guía de instalación Pagina 3