SIIG PCI-1S+DOS Manual de usuario descargar pdf (Pagina 4)

Driver Installation

This section provides information on how to install the

CyberSerial PCI drivers.

DOS

1. Boot up DOS and insert the driver CD.

2. Copy OXSER.EXE from the DOS folder to your C:

drive.

3. At the C: prompt, type in OXSER io=3e8 and the

serial ports will be set up as COM3.

If your system already comes with 4 serial ports

enabled, type in OXSER io=220 instead and the

ports will be set up as COM5.

4. Copy the OXSER command in step 3 into your

autoexec.bat and restart your system.

Windows 95

1. At the Update Device Driver Wizard, click Next.

2. Insert the driver CD, and click Other Locations.

Type in D:\9x, click OK, then Finish. (Change D: to

match your CD-ROM drive letter)

3. From the Insert Disk window, click OK. When the

Copying Files dialog box appears, type in

D:\9x, then click OK.

4. Restart Windows to complete the installation.

Windows 98/98SE

1. At the Add New Hardware Wizard window, click

Next.

2. Select Search for the best driver for your device

(Recommend), then click Next.

1 2 3 4 5 6 7 8 9 10 11 12

Sin comentarios

SIIG PCI-1S+DOS Manual de usuario Pagina 4