SIIG UltraATA 133 PCI RAID Guía de instalación descargar pdf (Pagina 14)

Windows ME

For A NewWindows ME Installation

1. Setup the RAID array prior to Windows installation.

2. Follow Microsoft procedures to install Windows

ME accordingly.

3. Once Windows has installed, right click My

Computer and click Properties. Select Device

Manager tab.

4. Double click PCI RAID controller listed under

Other Devices.

5. Select Driver tab and click Update Driver button.

6. Insert the driver CD, select Automatic search for a

better driver (Recommended), then click Next.

7. Click Finish, remove the driver CD, then click Yes to

restart Windows to complete the installation.

When Windows resumes, go to Medley GUI on page 22

and install the RAID monitoring utility.

For Existing Windows ME Installation

1. Setup the RAID array prior to driver installation and

boot up to Windows.

2. At the Add New Hardware Wizard, insert the driver

CD.

3. Select Automatic search for a better driver

(Recommended), then click Next.

4. Click Finish, remove the driver CD, then click Yes to

restart Windows to complete the installation.

To Verify Windows 98SE/ME Installation

1. Right click My Computer, click Properties, then

click Device Manager.

2. Double click SCSI Controllers, Silicon Image Sil

0680 Ultra-133... Controller should be displayed.

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 35 36

Sin comentarios

SIIG UltraATA 133 PCI RAID Guía de instalación Pagina 14