- 5 -
Quick Installation for SpectraWiz Software Summary
Installation for USB2EPP cable on Win98/ME/00/XP
1. If required, install adapter to add USB-2 ports. Cable will run 40x slower on USB-1 port.
>> Please note: software drivers should be installed before inserting adapter hardware.
Grab the driver CD from USB-2 adapter box and follow the manufacturers instructions. Note: for
Mercury brand adapters (VIA USB 2.0 drivers) run “setup.exe” on CD path =
"\USB\USB20_NEC\PC_Driver\setup.exe". OrangeUSB brand adapters under WinXP use
native Windows drivers, so insert adapter and Windows automatically installs drivers.
2. Insert USB2EPP cable with EPP2000 attached, into an available USB-2 port. When new
hardware found, insert the StellarNet CD or USB2EPP driver disk and provide path to the
appropriate folder “\SWDrivers-USB2EPP\Win2k” (for Win00/XP) or “\SWDrivers-
USB2EPP\Win9x” (for Win98/ME). On WinXP let windows to search for a suitable driver.
Installation for EPP-PCMCIA (by Quatech) or EPP-PCI (by Lava) card on Win9x/NT4
Install driver using documentation and diskette provided by card manufacturer found in adapter
box. Use Device Manager to verify new LPT port address (LPT2= 0278-027F or LPT3= 0268-
026F).
Installation for EPP-PCMCIA or EPP-PCI card on Win2000/XP
Install driver provided by StellarNet using the path to “\SWDrivers-EPP\Win2k”.
*** When installing the Lava PCI card, be sure to place it in PCI slot-0 or slot-1 ***
For integrated printer port (in EPP mode) use “Update Driver” in Device Manager.
When completed, use Device Manager to verify port address for the new WinRT device.
Install SpectraWiz from appropriate CD folder/disk (Win-9x-ME or Win-2k-NT-XP)
Win2000 only: after installation completes, goto SpectraWiz folder, click on Fix2000.bat.
Start SpectraWiz and verify spectral graph display. For parallel port operation, it is necessary to
Setup -> Interface port = Device Manager port address setting, and re-start.
After SpectraWiz installation, if irradiance calibration was ordered, install the cal files for
SpectroRadiometer operation using the StellarNet CD or diskette. The IRRAD-CAL files are
installed by clicking on the name “MyCal-nnnnn.exe” (nnnnn = spectrometer serial #).
If MyCal file was not supplied, then use Setup menu to install the wavelength calibration
coefficients listed on spectrometer label using “Setup -> Unit Calibration”.
Driver and software updates are easily downloaded from the StellarNet website
a. All drivers are in SWDriver password=”wdriver”
b. SpectraWiz for Win95/98/ME password=”wiz”
c. SpectraWizNT for WinNT/00/XP password="wiznt"
d. SWUpdate for all Windows vers password= no password ßget the latest version now
Problems with Quatech EPP-PCMCIA card: Use Device Manager to select another IRQ.
Problems with Lava EPP-PCI card: In SpectraWiz folder, click on Lava2000.reg, then re-boot
after power off shut-down. This may require Plug & Play OS setting in BIOS => No.
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales