SIIG Serial ATA PCI Guía de instalación descargar pdf (Pagina 16)

For An Existing Windows Server 2008 R2 Installation

1. Setup the RAID array prior to driver installation and

boot up to Windows.

2. Right click Computer, click Manage, select Device

Manager.

3. Right click RAID Controller, then click Update

driver software.

4. Insert driver CD, click Browse my computer for

driver software.

5. Type D:\Win7, then click Next. (Change D: to

match your CD-ROM drive letter)

6. Click Install. Click Close to complete the installation.

When Windows installation completes, go to Installing

SATARaid GUI on page 20 and install the RAID utility.

To Verify Windows Server 2008 Installation

1. Right click Computer, click Manage, double click

Diagnostics, select Device Manager.

2. Double click Storage controllers. Silicon Image SiI

3512 SATARaid Controller should be displayed.

Windows 2000

A new installation of Windows 2000 requires a floppy

disk for the driver installation. To make this floppy disk,

copy the contents of the Floppy folder, found on the

driver CD, onto a blank floppy disk then follow the

directions starting on the next page.

For a New Windows 2000 Installation

1. Setup the RAID array prior to Windows installation.

2. Follow Microsoft Windows 2000 installation

procedure.

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 39 40

Sin comentarios

SIIG Serial ATA PCI Guía de instalación Pagina 16