SIIG Serial ATA PCI Guía de instalación descargar pdf (Pagina 14)

4. Insert the driver CD, type D:\NT4, then click OK.

(Change D: to match the drive letter of your

CD-ROM)

5. Highlight Silicon Image in the left column, then

select Silicon Image SiI... SATALink Controller,

and click OK.

6. Click OK, remove the driver CD and restart NT4.0 to

complete the installation.

To Verify Windows NT4.0 Installation

1. Double click My Computer/Control Panel/SCSI

Adapters.

2. Highlight Silicon Image... Controller from SCSI

Adapters listing and click Properties. A message

This device is working properly is displayed in the

dialog box when the driver is correctly installed.

Windows ME

For New Windows ME Installation

1. Install the board and follow Microsoft procedures

to install Windows ME accordingly.

2. Once Windows has been installed, right click My

Computer, then click Properties. Select Device

Manager tab.

3. Double click PCI Mass Storage Controller listed

under Other Devices.

4. Select Driver tab, then click Update Driver button.

5. Insert the driver CD, select Specify the location of

the driver (Advanced), then click Next.

6. Check Specify a location, uncheck the other box,

type D:\ME, click Next. (Change D: to match the

drive letter of your CD-ROM)

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 20

Sin comentarios

SIIG Serial ATA PCI Guía de instalación Pagina 14