SIIG Serial ATA PCI Guía de instalación descargar pdf (Pagina 8)

2. At the Found New Hardware Wizard, select Locate

and install driver software (recommended), click

Continue. Click Don't search online.

3. Insert the driver CD, click Next.

4. At The software for this device has been successfully

installed, click Close to complete the installation.

To Verify Windows Vista Installation

1. Right click My Computer and click Manage.

2. Click Continue, click Device Manager.

3. Double click Storage controllers, Silicon Image

SiI... Controller should be displayed.

Windows XP (32-bit) / Server 2003 (32-bit)

For New Windows XP / Server 2003 Installation

A new installation of Windows XP / Server 2003 requires

a floppy disk for the driver installation. To make this

floppy disk, copy the contents of the Floppy folder,

found on the driver CD, onto a blank floppy disk then

follow the directions below.

1. Install the board and follow Microsoft procedures

to install Windows accordingly.

2. Restart your system if prompted by Windows

installation.

3. At the Windows Setup screen, press F6 to install the

driver.

4. Insert the driver diskette. Press S then press Enter.

5. Select Silicon Image SiI... Controller and press

Enter.

6. Press Enter to continue and follow the on-screen

instructions to complete the installation.

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 19 20

Sin comentarios

SIIG Serial ATA PCI Guía de instalación Pagina 8